Common Dishwasher Problems
When cleaning your home, having dishwasher problems is the worst experience. This can lead to a pile of dirty dishes, leading to issues like mold and pest infestations.
This is why it’s essential to call the right professional for the job. If the cause of your dishwasher issues is water or drainage-related, immediately call a plumber.
On the other hand, if problems with the appliance itself caused it, it is better to call appliance repair services. With this being said, it’s vital to know the common dishwasher problems so you know how to deal with each one.
1. Leaks
Leaks are one of the most common dishwashing problems that occur. They’re also easy enough to identify.
Make sure you’re not using too much detergent, as this could cause the leak you’re experiencing. When you notice soapy residue in the detergent tray, this signifies you have too much detergent.
Also, poor stacking for your dishes could cause a leak. Don’t put too many dishes in your machine.
You should also be sure to check the pipe connections at the back of your machine. They should be appropriately fastened and in adequate condition.
Your dishwasher may also have corroded at the bottom, and there’s no other solution but replacing your dishwasher on your next payday.
2. Not Filling
If you notice your dishes coming out still dirty, there’s a water problem. The host water stop valve should be fully open when checking under the sink.
It would also be helpful to check the manual on whether or not you can access the valve. For all you know, this could be clogged with debris.
Of course, you can always call the help of a handyman to help with any further repair or cleaning of your dishwasher, especially when technical problems continue to occur.
3. Not Draining or Washing
Your hose may be damaged or your drains may be blocked if the water in your dishwasher isn’t draining. If neither issue is applicable, you may need a new pump.
Like other issues in this list, you could also check your manual to replace your dishwasher’s pump. Dirty plates after a wash cycle mean that poor loading is the culprit.
You shouldn’t just be stacking your dishes wherever, as plates may be in the way of others. As a result, water and detergent won’t reach them.
As a rule of thumb, proper stacking is placing your plates in the bottom rack first. Start from the middle of the tray and work your way outward.
4. Excessive Noise
Several factors could result in excessive noise, like loose or worn parts or bad stacking. You may observe in this list that poor stacking can result in several issues in your dishwasher.
So it’s essential to practice proper stacking habits to avoid breaking your dishwasher entirely. Feel your dishwasher when there’s excessive noise.
If it’s cold, try to see if there are any hard objects like bones, grant knives and forks, and the like.
5. Cold Water
If the water in your dishwasher isn’t heating like normal, hold a thermometer stat under the hot water tap for at least two minutes. It should show that it’s at least 140 degrees Fahrenheit or 60 degrees Celsius.
If not, turn up the dial on your hot water. A faulty heating element or thermostat is among the common reasons your dishwasher does not heat up.
This may be caused by grease and deposit build-up.
If and when your dishwasher is irreparable or it’s not economical to repair it, you can opt to replace it instead.
You can see here some of the best dishwashers to purchase. On your next self-care spree or when you’re running errands, don’t forget to buy a new one for your home.
Dishwashers are highly convenient, and any problems with it should be fixed urgently. For more home maintenance tips, feel free to visit this page.